Application image
ACF Tile Adhesive
A specially blended mortar with chemical additives that produces an excellent, fast-setting dry-set mortar.
Technical data and packaging available from ACF.Enquire
Specified to perform.
Explore ACF products across Construction Chemicals, Oil & Gas, and Water Treatment, with solutions developed for demanding construction, industrial, and infrastructure applications.
38published products
Construction Chemicals
ACF construction chemicals for bonding, waterproofing, flooring, repair, protection, and specialist finishes.
38 resultsContact ACF for packaging and quotation
Application image
ACF Granite and Pool
A single-component tiling adhesive mortar combining cement, selected grades of silica sand, admixtures and water repellents.
Technical data and packaging available from ACF.Enquire
Application image
ACF ML Super 2K
A two-component elastomeric waterproofing coating based on selected acrylic polymer and a graded cement-based filler. The ready-to-use kit only requires mixing at the job site.
Technical data and packaging available from ACF.Enquire
Application image
ACF ML Polymer
A single-component elastomeric coating based on a new-generation pure acrylic polymer.
Technical data and packaging available from ACF.Enquire
Application image
ACF Epoxy Primer HB
A solvent-free, two-component epoxy wall and floor primer with non-sag characteristics and strong adhesion to overcoating.
Technical data and packaging available from ACF.Enquire
Application image
ACF Epocoat FC 200
A two-component, high-solids floor coating for concrete and steel surfaces. It is intended for interior use and is applied at approximately 200 microns dry-film thickness.
Technical data and packaging available from ACF.Enquire
Application image
ACF Epoxy Paint
A two-component, solvent-free epoxy resin coating for metal and concrete floors. It provides corrosion and chemical resistance with a high-gloss finish at approximately 300-500 microns dry-film thickness.
Technical data and packaging available from ACF.Enquire
Application image
ACF Epocoat SL
A three-component, solvent-free, pigmented epoxy self-leveling product mixed on site and applied at approximately 0.8-2 mm thickness.
Technical data and packaging available from ACF.Enquire
Application image
ACF Powerfloor SL 2K
A two-component, solvent-free, pigmented epoxy self-leveling product mixed on site and applied at approximately 0.8-2 mm thickness.
Technical data and packaging available from ACF.Enquire
Application image
ACF Epo Screed
A three-component, solvent-free, abrasion-resistant epoxy flooring laid by trowel at approximately 3-6 mm. The tough, slip-resistant system is intended for high impact, abrasion, forklift movement, chemicals and oil exposure, and requires sealing or coating to close its porosity.
Technical data and packaging available from ACF.Enquire
Application image
ACF Epocoat WC
A two-component, high-solids wall coating for concrete and steel. It is intended for interior use and is applied at approximately 100-150 microns dry-film thickness.
Technical data and packaging available from ACF.Enquire
Application image
ACF Powercoat WB 100
A two-component, waterborne epoxy coating for walls and floors. It is low odor, abrasion resistant and intended for clean-room and other hygienic applications.
Technical data and packaging available from ACF.Enquire
Application image
ACF Epoxy Sealer P HB
A two-component epoxy sealer with abrasion and chemical resistance. It helps disperse special-effect pigments for 3D effects and can seal low-build 3D and decorative flooring.
Technical data and packaging available from ACF.Enquire
Application image
ACF PU Aliphatic
A two-component, solvent-based aliphatic polyurethane low-build coating based on selected polyester polyol. It is UV resistant and highly abrasion resistant.
Technical data and packaging available from ACF.Enquire
Application image
ACF PU Coat SL
A two-component, solvent-free, pigmented polyurethane self-leveling product applied at approximately 1-2 mm. It is for interior use; exterior systems require an ACF PU Aliphatic topcoat.
Technical data and packaging available from ACF.Enquire
Application image
ACF PU Coat Clear
A two-component, solvent-based aliphatic polyurethane clear low-build coating with high abrasion resistance, available in gloss and matt finishes.
Technical data and packaging available from ACF.Enquire
Application image
ACF Repmort
A single-component, cement-based, non-fiber repair mortar that only requires potable water for on-site mixing.
Technical data and packaging available from ACF.Enquire
Application image
ACF Plast Latex
A carboxylated styrene-butadiene copolymer latex admixture used as an integral adhesive for slurry bond coats and to improve the strength and waterproofing characteristics of plaster.
Technical data and packaging available from ACF.Enquire
Application image
ACF Latex
A carboxylated styrene-butadiene copolymer latex admixture used as an integral adhesive for slurry bond coats, mortar and concrete to improve strength and weather resistance.
Technical data and packaging available from ACF.Enquire
Application image
ACF Bond PVA
A selected-polymer, multi-purpose bonding agent, surface sealer, primer and concrete admixture.
Technical data and packaging available from ACF.Enquire
Application image
ACF Epoxy Putty
A solvent-free, non-sag, two-component multipurpose putty made from selected resin, hardener and graded fine fillers.
Technical data and packaging available from ACF.Enquire
Application image
Terrazzo Type Epoxy Flooring
A multilayer decorative flooring system based on epoxy and polyurethane technologies.
Technical data and packaging available from ACF.Enquire
Application image
ACF Decoscreed
A three-component decorative system comprising resin, hardener and colored sand. ACF Epo Sealer P HB is applied to seal porosity.
Technical data and packaging available from ACF.Enquire
Application image
ACF Broadcasting System
A decorative broadcast flooring system available with either epoxy-coated sand or polyurethane-coated sand.
Technical data and packaging available from ACF.Enquire
Application image
ACF Cem SL UL GP
A fast-drying, low-shrinkage, self-leveling cementitious underlayment based on high-strength cement, polymers, graded filler and additives. It is mixed with water and applied at approximately 3-6 mm.
Technical data and packaging available from ACF.Enquire
Application image
ACF Cemkote FC
A cement-based, polymer-modified fairing coat containing selected fine fillers and polymers. It only requires the addition of water on site.
Technical data and packaging available from ACF.Enquire
Application image
ACF Cempatch FR
A single-component, shrinkage-compensated, fiber-reinforced structural concrete repair mortar. Adding clean water produces a thixotropic consistency suitable for hand troweling or low-pressure wet spray on vertical and overhead surfaces.
Technical data and packaging available from ACF.Enquire
Application image
ACF Floorhard NM
A one-part, pre-blended concrete floor hardener made from graded non-metallic aggregates, additives, cement and pigments. It improves abrasion resistance and inhibits dust formation for interior or exterior floors.
Technical data and packaging available from ACF.Enquire
Application image
ACF NS Grout GP
A ready-to-use dry powder mixed with clean water to produce a free-flowing, non-shrink grout for gaps up to approximately 100 mm. Its cement, graded fillers and additives provide controlled plastic-state expansion and high early strength.
Technical data and packaging available from ACF.Enquire
Application image
ACF Mark WB
A single-component, water-based temporary road-marking paint based on selected pure acrylic polymer, with high abrasion resistance to vehicle movement.
Technical data and packaging available from ACF.Enquire
Application image
ACF PE Paste
A colored paste based on selected unsaturated polyester resin, additives and high-quality pigments, available in customer-specified shades.
Technical data and packaging available from ACF.Enquire
Application image
ACF Track Paint
A cold-applied, abrasion-resistant, flexible acrylic coating for asphalt and concrete surfaces. It creates a colorful, medium-texture, non-skid surface for pedestrian and medium-traffic areas.
Technical data and packaging available from ACF.Enquire
Application image
ACF Microcem
A two-component, high-strength microcement for walls and floors that produces a very smooth final finish.
Technical data and packaging available from ACF.Enquire
Application image
ACF Microcem 1K
A single-component, high-strength microcement for walls and floors that produces a smooth to very finely textured finish.
Technical data and packaging available from ACF.Enquire
Application image
ACF Microcem 1K Plus
A single-component, high-strength microcement for walls and floors with a textured, visually rough appearance that remains smooth to the touch.
Technical data and packaging available from ACF.Enquire
Application image
ACF Microcem 1K Decoplast
A single-component, high-strength microcement for walls and floors with a highly textured, visually rough appearance that remains smooth to the touch.
Technical data and packaging available from ACF.Enquire
Application image
ACF Epocoat CTE
A self-priming, two-component, solvent-free, high-build coal-tar epoxy coating that protects steel, concrete, timber and other construction materials in corrosive environments. It is abrasion resistant and normally applied as a two-coat system.
Technical data and packaging available from ACF.Enquire
Application image
ACF Epocoat CTE 2000
A self-priming, two-component, solvent-free, high-build coal-tar epoxy coating that protects steel, concrete, timber and other construction materials in corrosive environments. It is abrasion resistant and normally applied as a two-coat system.
Technical data and packaging available from ACF.Enquire